Wells and Borings
- Wells and Borings Home
- EPA Request: Nitrate
- Construction of Wells and Borings
- Laws and Rules
- Minnesota Well Index
- Natural Disasters
- Online Services
- Sealing of Wells and Borings
- Special Construction Areas
- Water Quality and Testing
- Water Information
- Well Disclosure
- Well Partners
- Accredited Laboratories/Well Water Testing
- Clean Water Fund
- Contaminants in Water
- Flooded Wells
- Water and Health
Environmental Health Division
Bacterial Safety of Well Water
It is not practical to test water for every disease-causing microorganism, but it is easy to test for a group of indicator bacteria called total coliform bacteria. These bacteria are good indicators of sanitary protection of the well and water system because they are everywhere on the surface of the ground, but do not usually occur past a few feet into the soil. If they show up in a water test, they can indicate that surface contamination has gotten into the water and that disease-causing microorganisms may be present. Just as disinfection kills most disease-causing microorganisms, it also kills coliform bacteria.
Bacterial Safety of Well Water brochure by language:
While most coliform bacteria do not cause disease, their presence suggests there may be disease-causing microorganisms in your water. These microorganisms can cause diarrheas, dysenteries, salmonellosis, hepatitis, and giardiasis. Symptoms include diarrhea, vomiting, cramps, nausea, headaches, fever, fatigue, and even death sometimes. Infants, children, elderly people, and people with weakened immune systems are more likely to get sick or die from disease-causing microorganisms in drinking water.
Test for Coliform Bacteria every year
Water quality can change. Minnesota Department of Health (MDH) recommends you test every year for coliform bacteria, even if you have not noticed any changes in your water quality. MDH also recommends you test for coliform bacteria any time your well or water system is worked on or the water changes in taste, smell, or look.
MDH recommends you use an accredited laboratory to test your water. Contact an accredited laboratory to get sample containers and instructions, or ask your county environmental or public health services if they provide well testing services (Accredited Labs in Minnesota Accepting Samples from Private Well Owners [PDF]).
Learn more about testing well water at Well Testing, Results, and Options.
MDH may recommend you test for additional contaminants based on where you live.
Prevent bacterial contamination
Most of Minnesota’s groundwater is free of disease-causing microorganisms. The upper layers of soil and rock filter the water as it soaks into the ground. You can do the following to help maintain this natural protection:
- Make sure your well is located and constructed properly. Work with a licensed well contractor to do this.
- Inspect your well regularly and repair any damage. Things to look for are:
- Damage: Any cracks or holes in well casing, corrosion, loose wires, or soil settling?
- Well cap: Is it securely attached to the well casing? Is it broken or missing?
- Connections: Are the electrical conduit and other connections watertight?
- Mark your well with flags or posts to avoid hitting it with vehicles.
- Keep the well area clear of debris.
- Maintain minimum isolation distances from contamination sources, such as fertilizers, pesticides, septic systems, and feedlots (see Protecting Your Well for guidance).
- Do not tie animals to your well.
- Have a licensed well contractor seal wells that you no longer use. A well that you no longer use can be a pathway for contaminants to get into groundwater and is a safety hazard.
Go to > top.
Wells at higher risk
Some types of wells are at higher risk of being contaminated with harmful microorganisms. If any of the following are true about your well, contact a licensed well contractor to talk about what your best option is.
- Wells constructed before 1974 (when the Minnesota Well Code was developed).
- Dug wells with leaking walls and rotten boards for covers.
- Wells at the bottom of old frost pits.
- Wells with holes corroded through the casing.
- Wells too close to sewers, septic systems, or animal feedlots (see the Protecting Your Well webpage).
What to do if your water tests positive for Coliform Bacteria
- Use boiled or bottled water or water from a safe alternative source for cooking and drinking until you address the issue.
If nitrate or arsenic were also detected in your well water, boiling your water may not be the safest option. Boiling water that has these contaminants can increase their concentration and cause health problems.
- Disinfect your well with a chlorine solution. Contact a licensed well contractor to disinfect your well, or use the instructions on the Well Disinfection webpage.
- Test your well water again after disinfection to confirm there are no coliform bacteria.
- You can use the water again, without boiling, once the well has been disinfected and the water no longer tests positive for coliform bacteria.
What to do if all disinfection attempts fail
Sometimes disinfection alone will not take care of the issue. In these cases, work with a licensed well contractor to figure out what to do. You may have to take special measures, such as bailing out debris from the well or constructing a new well. Possible causes are:
- Small animals or debris got into the well.
- Openings or cracks developed in the upper part of the well casing.
- Soil and rock may not be adequately filtering the water, and surface bacteria may be traveling deeper than usual.
Go to > top.
Should I test my well water for anything besides bacteria?
Yes. Both natural sources and human activities can contaminate well water and cause short-term or long-term health effects. Testing your well water is the only way to detect most of the common contaminants in Minnesota groundwater; you cannot taste, see, or smell most contaminants. Minnesota Department of Health recommends testing for:
- Nitrate every other year. Bottle-fed infants under six months old are at the highest risk of being affected by levels of nitrate higher than 10 milligrams per liter in drinking water.
See Nitrate in Well Water.
- Arsenic at least once. About 40 percent of wells in Minnesota have arsenic in the water. Drinking water with arsenic in it for a long time can contribute to reduced intelligence in children and increased risks of cancer, diabetes, heart disease, and skin problems in adults.
See Arsenic in Well Water.
- Lead at least once. The well and water system may have parts that have lead in them, and that lead can get into drinking water. Lead can damage the brain, kidneys, and nervous system. Lead can also slow development or cause learning, behavior, and hearing problems.
See Lead in Well Water Systems.
- Manganese before a baby drinks the water. High levels of manganese can cause problems with memory, attention, and motor skills. It can also cause learning and behavior problems in infants and children.
See Manganese in Drinking Water.
Other contaminants sometimes occur in private water systems, but less often than the contaminants listed above. Consider testing for:
- Volatile organic chemicals if the well is near fuel tanks or a commercial or industrial area.
- Agricultural chemicals commonly used in the area if the well is shallow and is near cropped fields or handling areas for agricultural chemicals or is in an area of geologic sensitivity (such as fractured limestone).
- Fluoride if children or teenagers drink the water.
Go to > top